—PARTS TO BE BILLED AS USED—AND ADDED TO FINAL INVOICE—
Includes

Drain down of hot & cold water services disconnection and removal of exsisting tank drain down of central heating system

Disconnection of electrical Immerstion heater, cylinder thermostat

Assembly and installation of new tank, re-configuration of hot / cold, flow and return pipes and connect.

Installation of new Immerstion heater / re-connect electrical services

Refilling of systems commissioning unit electrical safety checks and benchmark

This is a repair service typically used to replace faulty washing machine valve or fix minor leak on waste pipe joint.

This is NOT to be used for fault / leak investigations

This is NOT to be used for appliance faults or repairs

Service can be used for
To investigate internal leak water, waste services
To investigate smells with drainage / consultation advise
To unblock or attempt to remove blockage on waste ( no parts included)

The service only covers a basic cleaning pipes or replacement of waste pipes if necessary .checking for smells .

IT DOES NOT INCLUDE RODDING THE DRIANS / External Underground drainage works

NOT GUARANTEED FIX.

To disconnect / remove old unit if necessary
To install plumbing services for water under sink installation minor re-configuration
This unit is typically Designed for sinks /shower's / basins

Any parts plumbing parts not included, they will be billed separately as used

Please make sure there is adequate space for the unit , and the area is clear

Thank You

Note do not use this service for blocked sink/drain it’s only for a minor Leak on pipe waste pipe work

Parts to be charged as used and added to the invoice

Note do not use this service for blocked sink/drain it’s only for a minor Leak on pipe waste pipe work

Parts to be charged as used and added to the invoice

Note do not use this service for blocked sink/drain/ bath it’s only for a minor Leak on pipe waste pipe work

Parts to be charged as used and added to the invoice

Based on assumption of access is available

Customer to remove bath panel where possible does not include removal re-fitting or re-sealing of panels

Please add parts to your order as required +book Now .


Please assemble the unit -ready for the engineer- to install vanity unit to existing pipe work /waste system.

This price dose not Include installing any waste or cold and hot pipe work.

Based on access available I.e. vanity basin, wall mounted basin or pedestal is easily removable

To remove toilet pan to gain access to leaking pan connector and re fit toilet

parts to be added to invoice as used.

Based On Assumptions

Toilet is in reasonable / good condition
Toilet pan is easily removable / not stuck down and pan fixing screws not decayed / rusted

Like for like installation

Can be high or low level cistern with flush pipe

Includes isolation of services
Removal of old toilet pan
Removal of old cistern
Assembly and installation of new toilet cistern / pan
Minor re-configuration of plumbing or waste services and connection
Installation of service valve if none present

Additional services available ask an engineer I.e. Disposal of your old equipment

Parts used to be billed accordingly

Like for like installation of a Close couple type toilet

Includes isolation of services
Removal of old toilet pan


Additional services available ask an engineer I.e. Disposal of your old equipment

Parts used to be billed accordingly

Use this service to install mains booster pump for cold feed inlet

Includes

Isolating services
Re-configuration of plumbing services
Installation of service valves
Installation of pump


Based On Assumptions

Internal cold water mains is accessible and sufficient room is available for unit to be installed
A local socket is available
Water mains is able to be isolated

15-Install Under Kitchen Water Softener

To re-configure exsisting pipe works / install part new
To re-configure waste services works / install part new
To assemble / install water softener
To maintain a non-softened supply for drinking where possible / advise
Commission pipework / equipment

Assumptions

Based on sufficient room available for unit and pipework
Does not include any carpentry works to cupboards / kitchen

To re-configure / install new sections of pipework
To install isolation valve(s) on supply pipework
To assemble /install water softener tap
To assemble / install water softner cartridges
To drill sink / worktop accordingly if required

To install new mains water connection to shower

Please read below

Assumptions made

Access below shower tray is possible I.e. removable skirting or shower tray plinth / trim
If the shower tray is low profile / directly mounted on floor assumptions is floor coverings removed and access hatch is available.
Any other situation please contact us and supply details for advise and costings

Service to include

Full removal of exsisting silicone where required
Full chemical clean of area
Installation of complete new sealant

Assumptions made

Area(s) to be re-sealed not used 6-8 hours prior to visit

To re-configure / install new cold plumbing services where required
To install isolation valve(s)
To assemble / install handheld bidet /components needed

Price include removing old sink and fitting new like for like

Includes

Isolation, draining of hot & cold water services, disconnection of water and waste services removal of old sink and tap

Assembly and installation of new sink, taps and waste, reconnect services, re-filling of hot / cold water services

To install replacment basin like for like and conection to exciting hot cold water supply

And waste system .

Please note if you need a complete new installation get in touch

This can include things like

To attend site and carry out assessment
To investigate cause of loss hot water services
To carry out fault diagnostics, electrical checks / tests
To provide consultation / advise
Can potentially include minor repairs within the allotted time or making safe

Follow up with customer written report

The price includes to supply and fit cooper/plastic pipe arrangements for the installation up to a maximum of six meters of pipe work .

Please make sure you have all the new pipe fittings supplied with the fridge and the instructions

To disconnect / remove old basin and pedestal
To assemble / install new basin and pedestal
To install taps
To install waste system i.e. pop up waste
To minor re-configure plumbing waste services connect

Does not include any materials

Based on the assumption the pedestal and basin have full access and are not boxed in or restricted access from woodwork or tiles

Based on the basin is not wall hung

Does not include any cosmetic works or tiling, boxing.

Additional costs could be due to materials or alterations to above services to suite actual works needed.

IF YOU WOULD LIKE US TO REMOVE OLD PIPE ADD THIS SERVICE ALSO TO YOUR BOOKING
To Install (like for like) Stench Pipe System 110mm

Based on pre-existing pipework being PVC type

Additional Risk Assessments, Costs for Pre-Exsisting Pipework being

Cast Iron

Asbestos

Prices do not include disposal or handling hazardous materials and disposal unless otherwise stated

Prices do not include removal and re-fitting of toilet’s additional supplementary charges will be made if required

Prices do include general repairs but does not include replacement brickwork if required

This price is for complete installation of new bathroom suite like for like connecting the services to existing plumbing outlets .

Note we charge a little extra for removing the old suite typically £79 per item I.e. (toilet / cistern) 1 item ( bath / panel ) 1 item Basin / Pedestal 1 item

We do not provide a waste disposal service for the old items .

Surestop is a unique and innovative Stopcock range, focused around protecting properties from the risk of water damage. With a simple flick of a switch, Surestop Stopcocks will completely STOP the water supply - without the use of electrics.

To re-configure cold water pipework install Surestop

To isolate hot / cold services
To disconnect / remove old tap
To assemble / install new tap
If required to re-configure services install new isolation valves and or flexible hoses

Assumptions made

Hot / cold services are isolatable
Access is available to pipework under basin no boxing

To replace a broken damaged plastic toilet cistern like for like
To re-configure / connect services

To investigate flow problems on a individual tap hot or cold services
To investigate flow problems on multiple taps hot or cold services
To investigate pressure / flow problems to property
To advise / consult issue report if required on observations

Assumptions made

All taps and pipework below are accessible
Location of stop cock is known and accessible and is functional

To re-fix a loose standard toilet pan to floor

Assumptions made

Floor is secure
If mounted on floorboards this is not rotten

To isolate hot / cold services
To replace damaged / leaking hoses on taps


Assumptions made

All pipework below taps is accessible
Hot / cold services can be safely isolated
Bath panel has been removed if it’s the Bath tap hoses and access is needed.
Bath taps hoses are accessible

Parts are needed for this Service , after you have booked a member of our team will and part typical cost Inlet valve from £17.50 +vat

If the syphon is letting by into the pan you need to select Major repair service

Note , Assumptions made that we have access at the rear and side for fitting new parts

If the area,s have boxing please remove it prior to our visit —thank You

To Replace Broken Waste Pipes External Wall. (Not Stench Pipe) @

To replace existing bath panels ( like for like ) plastic type @

7- Install Outside / Inside : Tap booking note, the cost shown here is for fitting an outside tap up to three metes appropriately, extra charges will apply for longer pipe runs

Please note: Does NOT include materials to be billed as used

9 -Plumb In Washing Dishwasher Machine Full Installation @

10- Disconnect Dishwasher Washing Machine ( for Moving House ) @

11- To Connect Washing Machine/ Dishwasher To Exsiting Services @

12-Broken flush handle replacment standard toilet @

Assumption made

The toilet syphon ( inside the cistern. ) is in good working condition
Standard handle

13 -To install a replacement toilet seat @

Add on service

Only to be used when booking other services otherwise a minimum of 1/2 hour will be charged at our prevailing rate

To gain access to toilet concealed toilet cistern typically behind removable accessible cupboard plinth
To isolate services
To disconnect / remove old cistern
To assemble / install new cistern
To carry out minor re-configuration of services / connect

Assumptions made

Toilet cistern is accessible
Cold water services can be isolate

Parts are required for the job - After you have booked Engineer will add parts to your booking typically a kit is required for this job it will be in the region of 48 +vat .

To supply and fit all new parts for cistern I.e. syphon, water fill valve, push button, close coupler connector, nuts / bolts / wing-nuts

We will separate the cistern from the toilet pan, fit new parts and re assemble and fit

Note , Assumptions made that we have access at the rear and side for fitting new parts

If the area has boxing please remove it prior to our visit —thank You .

Typical parts for this job would Approximately be £48 + vat

We normally carry a few taps you can decide which one you would like

-Includes removal of old taps -Minor re-configuration of services if required -Installtion of service valves if applicable -

Assumptions made: Access is possible below sink If there is restricted access or custom fitted wooden panels fitted furniture please get in touch or arrange access prior to booking appointment .

Please reomove all your items from the cupboards before our visit thank you

Parts are required for this job
PLEASE NOTE EXTRA CHARGES MAY APPLY TO FIIT A SHOWER RAIL TO WALL FROM BATH TAP MIXER £35 +vat
-Includes removal of old taps -Minor re-configuration of services if required -Installtion of service valves if applicable -Can include installation of bath shower mixer intergrated on taps

Assumptions made: Access is possible below bath and or a standard plastic bath panel is fitted. If it has restricted access or custom fitted wooden panels fitted furniture please get in touch or arrange access prior to booking appointment as you would have to remove bath panel you-self.

Dose not include taps
Parts are required for this job

-Includes removal of old taps -Minor re-configuration of services if required -Installtion of service valves if applicable -

Assumptions made: Access is possible below basin If there is restricted access or custom fitted wooden panels fitted furniture please get in touch or arrange access prior to booking appointment .More difficult jobs may in-cure extra charges .

Note

Assumptions are that there are appropriate means to isolate the hot and cold water supplies . If unsatisfactory means to isolate and extra charge will apply minimum £58 + vat to be billed extra .

Please add parts to your order as required +book Now .


if you need multiple services simply see top left , [+add to Booking ]- then select next time slot

Leaking or seized internal stop tap

To Install replacement or additional valve for internal mains water isolation.

Based upon certain assumptions

We are able to isolate the water supply further downstream

This service only includes replacment inlet valves

Note , Assumptions made that we have access at the rear and side for fitting new parts

If the area,s have boxing please remove it prior to our visit —thank You

To install plastic bath panel and remove old item , not including any carpentry wood work , additional charges may apply

Parts will be charged as used and added to the booking

Install Services dishwasher or washing machine

We do not fit wooden panels to dishwashers.or washing machines we do not remove or relocate the old machines . please have the new machine un packed and reading for the engineer This cost cover minor changes to exsisting waste pipe on cold water pipes system. It dose not cover complete new install for the waste .

This service is for minor installations within three meters cold water supply /and using exsisting internal drain outlet with in close proximity.

Assumptions made that we can access underside ie bath panel can be removed ,

If it’s a fixed or tiled type , please remove it for the engineer prior to our visit

We are not responsible to refit the bath panel if it’s not practical to do so